>>>雙面導通PU基碳膜采用高分子超導納米碳黑、石墨烯、助劑等混合樹脂經壓延工藝制作而成。成品薄膜表面光滑平整，面阻均勻穩定，雙面導通性能優良，材質相對于PE基碳膜較柔軟，整體均一耐彎折，耐酸堿溶劑、耐油、耐熱、耐寒及抗氧化，使用壽命可達15年以上。另外可以通過調整基材的配比，實現材料的防水、防銹、阻燃及延展性等方面的特殊要求。

>>>The double-sided conducting PU-based carbon film was prepared by calendering with high molecular superconducting nano-carbon black, graphene and auxiliary agent. The finished film has smooth and flat surface, uniform and stable surface resistance, excellent double-side conduction performance, softer material compared with PE-based carbon film, uniformly bending resistance, acid and alkali solvent resistance, oil resistance, heat resistance, cold resistance and oxidation resistance, and service life of more than 15 years. In addition, the special requirements of waterproofing, antirust, flame retardant and ductility can be realized by adjusting the proportion of the base material.

應用于各類美容、保健等理療電極產品；

Products are applied to all kinds of beauty, health care and other physiotherapy electrode products;

應用于各類檢查、治療、監護類理療電極產品；

Products are also used in all kinds of examination, treatment, monitoring medical electrode products;

應用于各類電器、電纜、航天、石化等電磁屏蔽產品；

Produces are used in all kinds of electrical appliances, cables, aerospace, petrochemical and other electromagnetic shielding products;

應用于貼片電極、壓感電路及各種柔性耐腐蝕電極產品；

Produces are used in patch electrode, voltage inductance circuit and various flexible corrosion-resistant electrode products;

應用于各種面式發熱、保溫、供暖及除霧類等低溫電熱產品。

Produces are applied to all kinds of low temperature electric heating products such as surface heating, heat preservation, heating and defogging.

 主要技術參數如下：

The main technical parameters are as follows:  

●常規方阻General square resistance：10~100,000Ω/□

●可通過表面涂布石墨烯、超導碳漿或銀漿的方式將面阻**降至0.02Ω/□；

●The surface resistance can be reduced to 0.02Ω/□by surface coating graphene, superconducting carbon paste or silver paste.

●厚度Thickness：20~400μm

●寬度Width：5~1500mm

●長度不限 Unlimited length

●常規使用溫度 Conventional service temperature：-20~150℃

●極端耐溫性 Extreme temperature resistance：-60~180℃