HW230EW產品優勢 |HW230EW Product Advantage
* 全數字IGBT控制技術，電弧控制穩定、焊縫成形好，飛濺小。
* 輔助電220V2KW50Hz輸出,焊接工作時可同時帶水泵、角磨機、砂輪、照明燈等工具。
* 無刷、誘導子發電技術，發電機同時輸出兩個發電繞組，相互獨立，互不影響。焊機持續作業能力強，可以做到人停機不停24小時連續作業，電效率高。
* 用于野外施工、適用多種焊條，可以出色施行纖維素焊條、低氫焊條及氬弧焊的全位置焊接。
* Full digital IGBT control technology, stable arc control, good weld shape and small spatter.
* Auxiliary electricity 220V 2KW 50Hz output, welding work can be accompanied by water pump, angle grinder, grinding wheel, lighting and other tools.
* Brushless and inducer power generation technology, the generator outputs two power generation windings at the same time, which are independent of each other and do not affect each other. The welding machine has strong continuous wo*ng ability, which can make people stop wo*ng continuously for 24 hours, and the electric efficiency is high.
* Used for field construction, suitable for a variety of electrodes, can be excellent implementation of cellulose electrode, low hydrogen electrode and argon arc welding all-position welding.
HW230EW性能參數配置/Specification of HW230EW
碳刷/Brush
無/No
驅動方式/Driven
直接耦合/Direct coupling
防護等級/Protection class
IP23S
絕緣等級/Insulation class
H
焊接輸出/Descending Output
額定功率/Rated power
5.6 KW
額定電流/Rated current
200 DCA
額定電壓/Rated voltage
28 DCV
空載電壓/Idle voltage
90 DCV
暫載率/Rated duty cycle
50%
焊接電流調節范圍/Current range control
（45-230）DCA
焊條直徑/Applicable electrode
2.0-5.0 mm
輔助電輸出/Accessorial Receptacle
額定功率/Rated power
2.0 KW
額定電壓/Rated voltage
220 ACV
輔助電額定電流/Rated current
9.1 A
暫載率/Rated duty cycle
****
發動機/Engine
型號/Model
三菱/MITSUBISHI GT1300
類型/Type
四沖程單缸/4-stroke, 1-cylinder
排氣量/Displacement
391 CC
額定功率/Rated output power
13 HP
額定轉速/Rated speed
3600 rpm
啟動方式/Starting system
手啟動/Recoil
燃料/Fuel
無鉛汽油/Unleaded gasoline
冷卻方式/Cooling system
風冷/Air cooling
其它/Others
油箱容量/Fuel tank capacity
12 L
外形尺寸/Dimension (L×W×H)
707×530×560 mm
重量/Net weight
98 Kg
車輪/Wheel kit
選配/option
