邁科微儀器維修中心，專注于維修安捷倫近二十年，擁有對安捷倫N90XX系列N9010A信號分析儀豐富的維修經驗和安捷倫儀器維修的知識，能夠達到送修一小時檢測和拆機講解，真正讓顧客更了解故障、更清楚問題的所在、更安心的交給我們團隊維修

邁科微儀器維修中心主要維修進口儀器，強項是高頻的射頻微波儀器維修常修的品牌包括：Keysight是德科技（以及原來的安捷倫）、羅德與施瓦茨這兩個品牌比較多，其他就是安利、泰克等等主要的類型有：網絡分析儀、頻譜分析儀、信號發生器、示波器、信號分析儀、綜合測試儀、接收機等等

本團隊接修的儀器屬完全自主維修，很多同行難修的儀器也轉到我們這修，同時歡迎更多同行將難修的進口高頻儀器轉到我們公司維修我司維修的儀器技術指標均可通過計量，并且提供保修服務

另外本公司提供54臺安捷倫網絡分析儀E5071C 可供各企業租賃使用，詳情可詳談

其他業務包括：儀器回收、二手儀器出售

頻率    10 Hz 至 44 GHz

頻率選件    3.6、7、13.6、26.5、32、44 GHz，使用混頻器可達 1.1 THz標準衰減器衰減范圍    60 dB標準衰減器步進    10 dB實時帶寬選件    無1 GHz 時的 DANL    -170 dBm至大分析帶寬    40 MHz1 GHz 時，1 MHz 頻偏處的相位噪聲    -136 dBc/Hz1 GHz 時，10 kHz 頻偏處的相位噪聲    -109 dBc/Hz1 GHz 時，30 kHz 頻偏處的相位噪聲    -109 dBc/Hz無雜散動態范圍    無三階截獲（TOI），1 GHz 時    +18 dBm可用應用     是至大實時帶寬    無總體幅度精度    ±0.27 dB帶寬選件    標配 25，40 MHz

a. The warranted performance is only the sum of all errors under autocoupled conditions. Under non-autocoupledconditions, the frequency readout accuracy will nominally meet the specification equation, except for conditionsin which the RBW term dominates, as explained in examples below. The nominal RBW contribution to frequencyreadout accuracy is 2% of RBW for RBWs from 1 Hz to 390 kHz, 4% of RBW from 430 kHz through 3 MHz (thewidest autocoupled RBW), and 30% of RBW for the (manually selected) 4, 5, 6 and 8 MHz RBWs.First example: a 120 MHz span, with autocoupled RBW. The autocoupled ratio of span to RBW is 106:1, so theRBW selected is 1.1 MHz. The 5% × RBW term contributes only 55 kHz to the total frequency readout accuracy,compared to 300 kHz for the 0.25% × span term, for a total of 355 kHz. In this example, if an instrument had anunusually high RBW centering error of 7% of RBW (77 kHz) and a span error of 0.20% of span (240 kHz), thetotal actual error (317 kHz) would still meet the computed specification (355 kHz).Second example: a 20 MHz span, with a 4 MHz RBW. The specification equation does not apply because theSpan: RBW ratio is not autocoupled. If the equation did apply, it would allow 50 kHz of error (0.25%) due to thespan and 200 kHz error (5%) due to the RBW. For this non-autocoupled RBW, the RBW error is nominally 30%,or 1200 kHz.b. Horizontal resolution is due to the marker reading out one of the sweep points. The points are spaced byspan/(Npts –1), where Npts is the number of sweep points. For example, with the factory preset value of 1001sweep points, the horizontal resolution is span/1000. However, there is an exception: When both the detectormode is “normal” and the span > 0.25 × (Npts –1) × RBW, peaks can occur only in even-numbered points, sothe effective horizontal resolution becomes doubled, or span/500 for the factory preset case. When the RBW isautocoupled and there are 1001 sweep points, that exception occurs only for spans > 750 MHz.c. Specifications apply to traces in most cases, but there are exceptions. Specifications always apply to the peakdetector. Specifications apply when only one detector is in use and all active traces are set to Clear Write. Specificationsalso apply when only one detector is in use in all active traces and the "Restart" key has been pressedsince any change from the use of multiple detectors to a single detector. In other cases, such as when multiplesimultaneous detectors are in use, additional errors of 0.5, 1.0 or 1.5 sweep points will occur in some detectors,depending on the combination of detectors in use.d. In most cases, the frequency readout accuracy of the analyzer can be exceptionally good. As an example, Keysighthas characterized the accuracy of a span commonly used for Electro-Magnetic Compatibility (EMC) testingusing a source frequency locked to the analyzer. Ideally, this sweep would include EMC bands C and D and thussweep from 30 to 1000 MHz. Ideally, the analysis ban**idth would be 120 kHz at ?6 dB, and the spacing of thepoints would be half of this (60 kHz). With a start frequency of 30 MHz and a stop frequency of 1000.2 MHz anda total of 16168 points, the spacing of points is ideal. The detector used was the Peak detector. The accuracy offrequency readout of all the points tested in this span was with ±0.0032% of the span. A perfect analyzer withthis many points would have an accuracy of ±0.0031% of span. Thus, even with this large number of displaypoints, the errors in excess of the bucket quantization limitation were negligible.