鎳礦抓斗

我公司生產的鎳礦抓斗，主要用來抓取鎳礦、鐵精粉、紅粘土等粘性很強的礦石，由于近來鎳礦、鐵精粉、紅粘土等礦石在被人們廣泛使用，因此，許多大港口就存在著這樣一個問題，在裝卸這此礦石的時候，存在著裝卸效率低，抓斗內壁被很多礦石粘著，我公司為了解決這一難題，現已研究并生產出來這種專業抓取很粘的礦石抓斗，原理是：不讓鎳礦擠壓，這樣鎳礦就不會粘斗體，我司鎳礦抓斗是在繩索抓斗的基礎上改進，沒有斗瓣后顎板。

Our grab nickel production, nickel is mainly used to crawl Hard fine powder, red clay minerals such as highly viscous due to the recent nickel Hard fine powder, red clay and other minerals to be widely used, so Many major ports on the existence of such a problem, in which the ore handling when loading and unloading there is a low efficiency, has been a lot of ore grab adhesive wall, our company in order to solve this dilemma has been studied and produced by such a professional crawl very sticky ore grab, the principle is: grab the lowbeam calculated to increase the adoption of two pieces of solder, including the specific location of board and grab the bucket to create a circular flap, so Open grab discharging, the fight is on board, including the body wall from the top down (no contact with body panels Doo), to stick the body in fighting the viscous wall down, including mine, so, which greatly improved the handling grab the efficiency of ports and factories to solve the problem, which is purpuratus grab a patent, other manufacturers can not be produced.

?

鎳礦抓斗

一種繩索散貨抓斗包括上承梁，下承梁，鋼絲繩，斗體，滑輪，導向輪位裝置，撐桿和開閉斗限位塊，1.斗體沒有后鄂板，這樣減少抓鎳礦時對礦的擠壓力，2.斗體斗瓣角是圓形的，抓鎳礦時不會粘斗，3.斗體通過特殊形狀設計和特殊工藝加工達到卸鎳礦不粘斗。

Nickel ore grab

A rope bulk grab includes an upper bearing beam, a lower bearing beam, a steel wire rope, a bucket body, a pulley, a guide wheel positioning device, a brace bar and an opening and closing bucket limit block. 1. The bucket body has no rear jaw plate, which reduces the grip The squeezing force on the ore during the nickel ore. 2. The bucket petal angle of the bucket is round, and it will not stick to the bucket when grasping the nickel ore. 3. The bucket body is processed by special shape design and special process to achieve the non-stick bucket of nickel ore. .