概述
NAGKT-III型三相交直流校表儀(三相四線制)是我公司推出的新一代便攜式表源一體電表校驗儀。該產品具有外觀美、功能全、指標優、可靠性高、操作簡便等特點。擁有本裝置,不需另配標準即可校驗0.5級及以下各類電壓表、電流表、單相功率表、三相有功無功功率表、相位表、功率因數表、頻率表、同步表、各式電能表等。
主要功能和特點
1、基于DSP的數字信號合成和數據***處理技術,使得裝置輸出穩定可靠,精度高、指標優。裝置等級0.1級。
2、輸出交流(三相)電壓、電流,直流電壓、電流
3、電壓、電流量程可根據被試表設定,自動換檔。
4、表源一體,配有功率,頻率,相位,功率因數及交直流電壓電流標準,不需另配標準表即可手動或自動校驗各種指示儀表、電能表,自動計算并顯示校驗誤差。校驗時,可同時顯示一次值及二次值。
5、校驗結果可存儲、可預覽。
6、配置強大的微機管理平臺,可通過微機校驗、傳輸、打印及數據管理。
7、大屏幕液晶顯示,采用彈出式中英文菜單,光標任意移動,提供在線幫助提示,操作非常簡便,顯示內容豐富。
8、裝置具有外部軟件校準功能。
9、負載能力強,可直接帶1uF電容(100V檔)
10、多重保護:電源聯動保護、限流保護、自動關閉功放輸出等。
11、嚴格的過載試驗、顛震試驗、誤操作試驗、高溫老化試驗,可靠性異常好。
12、采用德國標準機箱,體積小、重量輕,便于攜帶。
技術指標
?????項???????????目 | ????????指?????????標 | |
? 電 ? 壓 | ??輸出量程 | 基本量程:75mV、25V、100V、250V、600V |
自動量程:15V~600V | ||
??調節范圍 | 0~130% UN | |
??調節細度 | 0.002%UN | |
??**輸出容量 | ≥20VA/相 | |
??精 度 | 0.1級 | |
? 電 ? 流 | 交流量程 | 基本量程:0.1A、1A、5A、25A |
自動量程:0.05A~25A | ||
直流量程 | 基本量程:20μA、200μA、2mA、20mA、0.1A、1A、5A、25A | |
自動量程:20μA~20mA及0.1A~25A | ||
??調節范圍 | 0~130%IN(25A檔,0~120%) | |
??調節細度 | 0.002%IN | |
??**輸出容量 | ≥25VA/相 | |
??精 度 | 0.1級 | |
頻 ? 率 | ??調節范圍 | 45HZ~65HZ |
??調節細度 | 0.01HZ | |
??調定值精度 | ±0.01HZ | |
相 ? 位 | ??調節范圍 | 0~359.99° |
??調節細度 | 0.01° | |
??精 ?度 | ±0.4°(額定電壓、電流滿量程輸出時) | |
??三相功率精度 | 0.1級(無功為0.2級) | |
??三相電壓對稱度 | 三相四線120°±0.4° 三相三線60°±0.4° | |
??電壓電流波形失真度 | < 0.3% | |
??電壓、電流、功率穩定度 | ≤0.02%(1分鐘) | |
??裝置綜合誤差 | 0.1% | |
??重量 | 18kg | |
??體積 | 432×448×175 | |
??供電電源 | 220V±10% | |
Overview
NAGKT-III-type three-phase AC and DC calibration table (three-phase four-wire system) is a new generation of portable table meter integrated meter calibrator. Theproducthastheappearance of the United States, full-featured, excellent indicators, high reliability, simple operation and so on. Phase table, power factor meter, frequencytable,synchronizationtable,single-phase power meter, three-phase active and reactive power meter, phase table, power factor meter, frequency meter, All kinds of energy meter.
Main function and characteristic
1, DSP-based digital signal synthesis and data acquisition and processing technology, making the device output stable and reliable, high precision,excellentindicators.Deviceclass 0.1.
2, the output AC (three-phase) voltage, current, DC voltage, current
3, voltage, current range can be set according to the table under test, automatic shift.
4, the table source of one, with power, frequency, phase, power factor and AC and DC voltage and current standards, without the need to reprovision the standardtablemanuallyorautomatically check a variety of instructions Meter, error. During calibration, both primary and secondary values can be displayed at the same time.
5, the calibration results can be stored, preview.
6, the configuration of a powerful computer management platform, through computer verification, transmission, printing and data management.
7, large-screen LCD display, pop-up menu in English and Chinese, the cursor any move to provide online help prompts, the operation is very simple, display rich content.
8, the device has an external software calibration.
9, load capacity, can be directly with 1uF capacitor (100V file)
10, multiple protection: power linkage protection, current limit protection, automatic power amplifier output off.
11, strict overload test, the shock test, misuse test, high-temperature aging test, the reliability of abnormal good.
12, use German standard chassis, small size, light weight, easy to carry.
TechnicalData
??????Item | Data | |
? Voltage | Output range | Basic Range:75mV、25V、100V、250V、600V |
Automatic Range: ?15V~600V | ||
Adjust range | 0~130% UN | |
Adjust fineness | 0.002%UN | |
Max output capacity | ≥20VA?Per Phase | |
Accuracy | 0.1?Level | |
? Current | AC Range | Basic Range:0.1A、1A、5A、25A |
Automatic Range:0.05A~25A | ||
DC Range | Basic Range:20μA、200μA、2mA、20mA、0.1A、1A、5A、25A | |
Automatic Range:20μA~20mA及0.1A~25A | ||
Adjust range | 0~130%IN(25A,0~120%) | |
Adjust fineness | 0.002%IN | |
Max output capacity | ≥25VA?Per Phase | |
Accuracy | 0.1?levle | |
Frequency | Adjust range | 45HZ~65HZ |
Adjust fineness | 0.01HZ | |
Setdataprecise | ±0.01HZ | |
Phase | Adjust range | 0~359.99° |
Adjust fineness | 0.01° | |
Accuracy | ±0.4°(WhenLargest Current & VoltageOutput) | |
Accuracy of three phases capacity | 0.1?level(0.2?levelforchoose) | |
Three phases symmetry | Three-phase four-wire:120°±0.4° Three-phasethree-wire:60°±0.4° | |
Voltage and currentwaveformdistortion | < 0.3% | |
Stability Degree | ≤0.02%(1?min) | |
Accuracy | 0.1% | |
Weight | 18kg | |
Size | 432×448×175 | |
Supply Power | 220V±10% | |

免責聲明:當前頁為 南澳電氣 NAGKT-III 三相校表儀產品信息展示頁,該頁所展示的 南澳電氣 NAGKT-III 三相校表儀產品信息及價格等相關信息均有企業自行發布與提供, 南澳電氣 NAGKT-III 三相校表儀產品真實性、準確性、合法性由店鋪所有企業完全負責。世界工廠網對此不承擔任何保證責任,亦不涉及用戶間因交易而產生的法律關系及法律糾紛,糾紛由會員自行協商解決。
友情提醒:世界工廠網僅作為用戶尋找交易對象,就貨物和服務的交易進行協商,以及獲取各類與貿易相關的服務信息的渠道。為避免產生購買風險,建議您在購買相關產品前務必確認供應商資質及產品質量。過低的價格、夸張的描述、私人銀行賬戶等都有可能是虛假信息,請您謹慎對待,謹防欺詐,對于任何付款行為請您慎重抉擇。
投訴方式:fawu@gongchang.com是處理侵權投訴的專用郵箱,在您的合法權益受到侵害時,請將您真實身份信息及受到侵權的初步證據發送到該郵箱,我們會在5個工作日內給您答復,感謝您對世界工廠網的關注與支持!