產品簡介

NABSQ系列升流器是為電力部門和工礦企業進行電氣設備試驗而設計制造的專用設備，適用于各種開關、電流互感器和其它電器設備的電流負載試驗及升溫試驗。

產品別名

互感器校驗用升流器、互感器檢定用升流器、升流器

產品特性

1、NABSQ系列升流器是由輸入繞組(220V)、輸出繞組(100A以下)及穿心繞組組成

2、銘牌上所注明的輸出電流是指穿心繞組允許通過的額定電流。當穿心多匝時，升流器允許通過的額定電流將成反比下降

3、銘牌上所注明的輸出容量與輸出電流和每匝電壓的乘積的比值既為在此輸出電流情況下允許穿心的**匝數

4、帶腳輪，便于搬運

產品參數

注：“升流器額定輸出”欄中，左邊為串聯輸出參數，右邊為并聯輸出參數。如：“0.5/1”中:“0.5”為串聯輸出參數；“１”為并聯輸出參數

Product introduction

This product is the power for current transformer primary current when test current transformer , or others 50HZ single phasepowerequipment.

Also called name

current generator, current generator for transformer testing

The Characteristics of the products

1. This product is composed by input winding (250V), output winding (under 100A) and gramme winding(above 100A).

2. The output current marked on the nameplate is the rated current of the gramme winding. The more the windings, the smallertheallowable ratedcurrent.

3. The maximum number of windings=the output capacity marked on the name plate/(output current ×voltage ofeachwinding).

4. With roller ,easy to transport.

The parameters of the products

1. Temperature -5～+40℃

2. Humidity < 80%

3. Allow long-term work under rated current.

4. Allow 1.5 times overload, time is half an hour