產品簡介

NACT-100互感器變比極性測試儀體積小、重量輕、測量范圍廣、便于攜帶，適于現場使用的電流互感器變比測試儀越來越成為互感器測試工作的必備手段。NACT-100互感器變比極性測試儀就是南澳電氣（武漢）有限公司總結國內外互感器特性,運用目前**研究理論及成果，結合現場使用的要求研制而成的。

產品別名

互感器變比極性檢測儀、互感器變比極性測試儀

產品特性

1、**采用電壓測量法，體積小重量輕，便攜式,滿足現場工作輕便性要求。

2、電壓波形由單片機程序產生，干凈純正，免除了電網干擾。

3、內部采用恒壓源，讀數穩定。

4、適用于從幾十安培至幾萬安培的所有電流互感器。所有電磁式電壓互感器。

5、能直接顯示變比值。

6、電子法測量互感器極性，簡單直觀。

產品參數

工作電源輸入：AC220V/50Hz

變比測量范圍：

5A/5A------25000A/5A；

5A/1A-------5000A/1A。

電磁式電壓互感器全系列。

測量精度：0.2%

體積：280mm×220mm×120mm

重量：2kg

Product introduction

Compact, light weight, wide measurement range, easy to carry, suitable for use in the field of current transformer turns ratiotestertransformertesting is increasingly becoming an essential tool. This is why NACT-100 transformer ratio polarity tester designed by?Nanao Electric Wuhan?Electric Co., which cantestsummarize andtransformer characteristics, designed basic on?latest theories and research results, combined with on-site use requirements from the development.

Also called?name?

CT tester, CT ratio polarity tester.

The Characteristics of the products?

1.?we are the?first company who take?voltage measuring method?in use, small in volume, light in weight,portable,meet the needsfor field tests.

2. voltage wave form generated by single chip process, clean and pure, without the interference by power network.

3.the internal of the device uses constant voltage source, with stable reading.

4. applies to current transformers of tens ampere to tens thousands ampere and all electromagnetic PT.

5. can directly display the transformer ratio.

6. electron method to test the transformer polarity, simple and straightforward .

The parameters of the products

1. Power supply: AC220V/50Hz

2. Ratio measurement range:5A/5A------25000A/5A；5A/1A-------5000A/1A

3. With CT, electromagnetic PT whole series

4. Accuracy :0.2%

5. Dimension:280mm*220mm*120mm

6. Weight :2Kg