產品簡介

NAYM便攜式鹽密度測試儀，也稱為直讀式等值鹽密度測試儀（鹽密儀）或電導鹽密測試儀，專為測試絕緣子等值鹽密度而設計。系統內置絕緣子等值鹽密度計算公式，讀數直觀。使用中英文菜單，操作簡單。NAYM便攜式鹽密度測試儀自帶微型打印機，方便數據保留和對比。大屏幕液晶顯示，所有參數和結果一目了然。內置大容量鋰電池，方便野外現場測試。

NAYM便攜式鹽密度測試儀遵照GB/T16434—1996《高壓架空線路和發電廠、變電所環境污區分級及外絕緣選擇標準》的規定和要求，適用于高線架空線路、發電廠、變電所等場所的外絕緣設備鹽密度測試。

產品別名

智能電導鹽密測試儀、直讀式等值鹽密度測試儀、電導鹽密測試儀、鹽密測試儀、鹽密儀、鹽密度測試儀

產品特性

1.直讀式，絕緣子表面鹽密度直接顯示，同時顯示電導率，并自動判斷污穢等級，不用計算也不要標準。

2.采用進口標準鉑電極，數據穩定可靠。

3.測量范圍大。鹽密測量范圍為0.0001μg/cm2～9.9999mg/cm2。

4.NAYM便攜式鹽密度測試儀自帶微型打印機，方便現場準確、真實、有效地記錄結果。

5.儀器內置大容量充電電池，并帶有電量顯示功能。欠壓自動關機，方便野外使用。

6.具有溫度自動補償功能。溶液電導值自動補償為20℃時的取值，也可以補償到我們需要的溫度和無補償測試。

7.測量數據準確，鹽密分辨率0.0001位。

8.具有系統自動校驗功能。開機自動校驗，提高測量準確度。

9.采用標準菜單操作。操作簡單易學，方便使用。

10.全量程自動切換。提高了測量各種低鹽密度時的準確度。

11.中英文帶背光液晶顯示。大屏幕中英文菜單。

12.可以同時測量溶液的電導率、溫度、等值鹽密度等。

產品參數

?

Product introduction

NAYM?portable salt density tester, also known as direct-reading equivalent salt density tester (salt density meter) or asaltdensity conductancetester, designed to test insulators equivalent salt density and design. System built insulators equivalent salt density formula, intuitive readings. UsingEnglish?menu,simple operation.NAYM?Portable Salt Density Tester comes with mini printer for data retention and contrast. Large LCD display, all parameters and results at a glance. Built-inhigh-capacitylithium battery,convenient for field testing.

NAYM?Portable Salt Density Tester comply GB / T 16434-1996 "high voltage overhead lines and power plants,substationsenvironmental pollutionclassification and external insulation selection criteria," the provisions and requirements for high-wire overhead lines, power plants, and change power Station andotherplaces outside the insulatedequipment salt density test.

Also called?name

Smart conductivity salt density tester, direct reading equivalent salt density tester, conductivity salt density tester, saltdensitytester, saltdensity meter, salt Density Tester

The Characteristics of the products

1. Direct reading , the insulator surface salt density directly, also shows conductivity, and automatically determinecontaminationlevels , withoutcalculation nor standards.

2. the use of imported standard platinum electrode , stable and reliable data .

3. large measurement range . Salt density measurement range 0.0001μg/cm2 ~ 9.9999mg/cm2.

4.NAYM?Portable Salt Density Tester comes with micro-printer, convenient on-site accurate, truthful and effectively recordtheresults.

5. instrument built-in high -capacity rechargeable battery , and with power display function . Voltage automatic shutdown , easyfielduse .

6. with automatic temperature compensation function. Automatic compensation of the solution conductance value when the value is20℃, also need to becompensated and non-compensated temperature testing.

7. accurate measurement data , salt density resolution 0.0001 .

8. with automatic calibration system function . Boot automatically check and improve measurement accuracy.

9. standard menu operation . Easy to learn , easy to use .

10. fully automatic range switching . Various salt to improve the measurement accuracy of the density .

11. English?LCD display with backlight . Large screen English?menu.

12. can simultaneously measure the conductivity of the solution , temperature, salt, equivalent density.

The parameters of the products

1. measuring range

??Salt density: 0.0001mg/cm2 ~ 9.9999mg/cm2 (by X-4.5-type insulators shall prevail)

??Temperature: 0 ℃~ 95℃

??Conductivity: 0.0001μs/cm ~ 200000μs/cm

2. Measurement Accuracy

??Salt density: 0.0001 resolution, full scale accuracy of better than ±2%

??Temperature: resolution 0.1, accuracy of better than ±0.5℃

??Conductivity: resolution range of 1/1000 of full scale accuracy of better than ±0.5%

Note: The low concentration of the test solution selected cell constant K value smaller electrode; when high concentrations in thetestcell constant Kvalue large selection of electrodes. See the Accessories section for more selection.

3. shows the output

??A. LCD measurement results.

??B. Through the printer can be directly output measurement data.

??C. To a computer through a data line for processing.

4. Conditions of Use

??Ambient temperature: 0 ℃~ 50℃

??Relative humidity: ≤80%

??Power supply: rechargeable battery equipped, can also be used AC220V ±10%,

??Dimension: 315mm ×280mm×140mm

??Weight: about 3KG