1250S型離子風棒是目前最有效，安全性**的靜電消除方式之一，與9050-4型靜電發生器配合使用，靜電消除率高達98%，在效工作距離高達150mm。廣泛應用于包裝，印刷，塑料，醫藥等行業，其特別的保護電路設計可以有效減少打火現象，并杜絕工作時電擊操作人員的危險現象，其采用進口放電針，壽命大大延長，消除率保持時間更長久。單支離子棒長度可達4000mm，每個靜電發生器可連接4支離子棒，總長度可達16000mm,其采用一次成型的鋁合金型材為固定外殼，美觀大方，安裝更簡易，采用進口高壓屏蔽線確保不會對其他電路采用干擾，離子棒全體密封，防潮防塵，從根本上杜絕短路等危險事故的發生，清潔亦更為方便，只需要用軟毛刷或軟毛牙刷即可完成清潔工作，省時省力。特別適用于環境惡劣和高速度高要求的設備之上，如涂布，復合，凹版印刷，分切機，印刷機，流延，擠出，雙拉，橫切，包裝，制袋，吹膜，淋膜等設備上

1250 /1250-S DS iss 1
How It Works:
The 1250 works by applying high voltage to an emitter inacontrolled
and safe way. The electric field around the emittersionisesthe
air - breaking it up into positive and negative ions. Theseionsneutralise
static electricity by being attracted to charges of theoppositepolarity.
Unused ions quickly dissipate into the atmosphere.
1250 / 1250-S
Static Eliminators
Powerful performance and
market-leading reliability make the
1250 and 1250-S the first choice
static eliminators for major
manufacturers
The 1250 and 1250-S neutralise static electricity on sheet,weband
similar processes throughout the plastics, packaging,convertingand
related industries. They are equally suitable forfood,medical,
pharmaceutical and many cleanroom applications.
Benefits and Advantages
Peformance
? The modern design gives high performance and completelyshocklessoperation.
? Stay-sharp etched emitters for better long termperformance.
? Emitters at 10mm pitch provide the most intense field ofstaticneutralisation.
? Advanced Hi-Flex polyurethane covered cable, rated at30kV,suitable for
processes from robots to high speed machinery.
Reliability
? All electronic components are fully encapsulated formaximumreliability.
? Robust construction ensures a long life of highperformance.
Ease of Use
? Simple to install - with fixed mounting studs (1250) orstudssliding in slot (1250-S).
? Operating distances of up to 150mm, best distance 20 -50mm.
? Washable and easy to clean.
? Wide range of options to extend usability. See next page.
Technical Specification
1250-S
The 1250-S has M4 x 20mm hexagon
head mounting studs which slide in a groove
on the underside of the bar.
This gives fast and simple installation.
1250
The 1250 has fixed M4 x 20mm studs
positioned 20mm from each end, and in the
middle for longer bars.
Length: From 60 mm to 6 m.
Construction: Anodised aluminium, epoxy resin, PVC andhardenedetched
emitters.
Cable: Hi-Flex polyurethane covered, 30kV screened cablewith25mm
bend radius. Standard length is 2m - longer lengths up to a
maximum of 10m can be specified at time of order (subject to
maximum load on power unit)
90° cable exit option. Bars may be supplied in series -joinedby
cable
Power Unit Use with Fraser 5.5kV Power Units - seeDatasheets.
Safety: 5mA maximum current from Power Unit. Highvoltageresistance
inside bars further limits current below 50μA.
Mounting: See sketches below to show 1250 and 1250-Soptions.200mmx
20mm steel fixing strips are supplied with each bar.
Temperature: 60°C
Standards: CE.
UL (US and C) Listing is a free of charge option.
Variants
EX - ATEX For hazardous areas see EX-1250 Datasheet.
Airboost For extending the range up to 500mm, see1250-ABDatasheet.
Balanced: For high tech applications where an accurateelectricalion balance
is required, see 1250-50 Datasheet.
High Charge: See Super 80 Datasheet - considered by many to bethemost
powerful static eliminator bar of its type available.
Combination: A passive static discharger may be combined witha1250, for
speeds over 1000m/min.