1：采用不受材料液體粘度變化影響的容積計量式鋼性載入泵，可進行穩定高精度的計量吐出。

The device uses a rigid load metering pump,using the volume measurement method.Measurement accuracy will not be the glue viscosity changes in theprocess and ensures accurate and spit accuracy.

2：當膠水含有較硬的填料時，必須采用耐磨泵，而且泵部整體豎直放置，使硬質填料不易沉積，使用維護更加方便，保證長期使用不影響吐出精度及比率。

We must use wear-resisting pump when the glue have a lot of hard additives.And the pump integrated vertically, so thehard packing is not easy to deposit, to ensure the long-term use does not affect the precision and the rate of spit.

3：選用動態混合時，采用新型混合器，多層攪拌槳強制混合，保證混合均勻。

The dynamic hybrid, using a new type of mixer, multiple impellers forced mixing, ensure uniform mixing.

4：選用伺服驅動時，吐出量精度更高，而且吐出量和吐出速度可由觸摸屏直接設定，更適合多品種工件的高精度吐出，并預留信號接口，可與機械手等自動化設備直接連接。

The servo drive, discharge amount of higher accuracy, and discharge amount and spit out the speed can be set by the touch screen directly, highprecision and is more suitable for many varieties of workpiece, and reserve signal interface, can be directly connected with a mechanical hand and other automation equipment.

?

5：整體設備設計緊湊，使用操作簡單方便。

The whole equipment has the advantages of compact design, simple operation.